Selective Synthesis of Cyclic Nitroene-Sulfonamides from Aliphatic Sulfamides and NOBF4

Described herein is the development of a desaturation and N-β-nitration reaction of cyclic amides, which is achieved by a selective hydrogen atom transfer (HAT)/oxidative desaturation/electrophilic nitration process. In this procedure, di-tert-butyl peroxide (DTBP) acted both as the oxidant and HAT reagent, and electrophilic NOBF₄ as nitration source. Notably, the application of produced cyclic nitroene-sulfonamides was showcased by their efficient transformations into 3-piperidones and poly-substituted piperidine derivatives.     

Regulation of Multiple Resonance Delayed Fluorescence via Through-Space Charge Transfer Excited State towards High-Efficiency and Stable Narrowband Electroluminescence

B- and N-embedded multiple resonance (MR) type thermally activated delayed fluorescence (TADF) emitters usually suffer from slow reverse intersystem crossing (RISC) process and aggregation-caused emission quenching. Here, we report the design of a sandwich structure by placing the B−N MR core between two electron-donating moieties, inducing through-space charge transfer (TSCT) states. The proper adjusting of the energy levels brings about a 10-fold higher RISC rate in comparison with the parent B−N molecule. In the meantime, a high photoluminescence quantum yield of 91 % and a good color purity were maintained. Organic light-emitting diodes based on the new MR emitter achieved a maximum external quantum efficiency of 31.7 % and small roll-offs at high brightness. High device efficiencies were also obtained for a wide range of doping concentrations of up to 20 wt % thanks to the steric shielding of the B−N core. A good operational stability with LT₉₅ of 85.2 h has also been revealed. The dual steric and electronic effects resulting from the introduction of a TSCT state offer an effective molecular design to address the critical challenges of MR-TADF emitters.     

Atomically Dispersed Iron Regulating Electronic Structure of Iron Atom Clusters for Electrocatalytic H2O2 Production and Biomass Upgrading

The integration of highly active single atoms (SAs) and atom clusters (ACs) into an electrocatalyst is critically important for high-efficiency two-electron oxygen reduction reaction (2e⁻ ORR) to hydrogen peroxide (H₂O₂). Here we report a tandem impregnation-pyrolysis-etching strategy to fabricate the oxygen-coordinated Fe SAs and ACs anchored on bacterial cellulose-derived carbon (BCC) (FeSAs/ACs-BCC). As the electrocatalyst, FeSAs/ACs-BCC exhibits superior electrocatalytic activity and selectivity toward 2e⁻ ORR, affording an onset potential of 0.78 V (vs. RHE) and a high H₂O₂ selectivity of 96.5 % in 0.1 M KOH. In a flow cell reactor, the FeSAs/ACs-BCC also achieves high-efficiency H₂O₂ production with a yield rate of 12.51±0.18 mol g_cat⁻¹ h⁻¹ and a faradaic efficiency of 89.4 %±1.3 % at 150 mA cm⁻². Additionally, the feasibility of coupling the produced H₂O₂ and electro-Fenton process for the valorization of ethylene glycol was explored in detail. The theoretical calculations uncover that the oxygen-coordinated Fe SAs effectively regulate the electronic structure of Fe ACs which are the 2e⁻ ORR active sites, resulting in the optimal binding strength of *OOH intermediate for high-efficiency H₂O₂ production.     

Desymmetrization of Geminal Difluoromethylenes using a Palladium/Copper/Lithium Ternary System for the Stereodivergent Synthesis of Fluorinated Amino Acids

Fluorinated amino acids and related peptides/proteins have been found widespread applications in pharmaceutical and agricultural compounds. However, strategies for introducing a C−F bond into amino acids in an enantioselective manner are still limited and no such asymmetric catalysis strategy has been reported. Herein, we have successfully developed a Pd/Cu/Li ternary system for stereodivergent synthesis of chiral fluorinated amino acids. This method involves a sequential desymmetrization of geminal difluoromethylenes and allylic substitution with amino acid Schiff bases via Pd/Li and Pd/Cu dual activation, respectively. A series of non-natural amino acids bearing a chiral allylic/benzylic fluorine motif are easily synthesized in high yields with excellent regio-, diastereo-, and enantioselectivities (up to >20 : 1 dr and >99 % ee). A density functional theory (DFT) study revealed the F−Cu interaction of the allylic substrate and the Cu catalyst significantly influence the stereoselectivity.     

Single-Atom Zinc Sites with Synergetic Multiple Coordination Shells for Electrochemical H2O2 Production

Precise manipulation of the coordination environment of single-atom catalysts (SACs), particularly the simultaneous engineering of multiple coordination shells, is crucial to maximize their catalytic performance but remains challenging. Herein, we present a general two-step strategy to fabricate a series of hollow carbon-based SACs featuring asymmetric Zn−N₂O₂ moieties simultaneously modulated with S atoms in higher coordination shells of Zn centers (n≥2; designated as Zn−N₂O₂−S). Systematic analyses demonstrate that the synergetic effects between the N₂O₂ species in the first coordination shell and the S atoms in higher coordination shells lead to robust discrete Zn sites with the optimal electronic structure for selective O₂ reduction to H₂O₂. Remarkably, the Zn−N₂O₂ moiety with S atoms in the second coordination shell possesses a nearly ideal Gibbs free energy for the key OOH* intermediate, which favors the formation and desorption of OOH* on Zn sites for H₂O₂ generation. Consequently, the Zn−N₂O₂−S SAC exhibits impressive electrochemical H₂O₂ production performance with high selectivity of 96 %. Even at a high current density of 80 mA cm⁻² in the flow cell, it shows a high H₂O₂ production rate of 6.924 mol g_cat⁻¹ h⁻¹ with an average Faradaic efficiency of 93.1 %, and excellent durability over 65 h.     

Braided Fiber Current Collectors for High-Energy-Density Fiber Lithium-Ion Batteries

Fiber lithium-ion batteries represent a promising power strategy for the rising wearable electronics. However, most fiber current collectors are solid with vastly increased weights of inactive materials and sluggish charge transport, thus resulting in low energy densities which have hindered the development of fiber lithium-ion batteries in the past decade. Here, a braided fiber current collector with multiple channels was prepared by multi-axial winding method to not only increase the mass fraction of active materials, but also to promote ion transport along fiber electrodes. In comparison to typical solid copper wires, the braided fiber current collector hosted 139 % graphite with only 1/3 mass. The fiber graphite anode with braided current collector delivered high specific capacity of 170 mAh g⁻¹ based on the overall electrode weight, which was 2 times higher than that of its counterpart solid copper wire. The resulting fiber battery showed high energy density of 62 Wh kg⁻¹.     

KI-Mediated Chlorine Gas-Free Synthesis of 3,3-Dichloro-2-oxindole Derivatives

An efficient and environmentally friendly methodology for 3,3-dichlorination and 2-oxidation of indole derivatives is described. Using KI as promotor, MCl (M=K, Na) as chlorine source, and oxone as oxidant, the reaction proceeds smoothly affording various functionalized 3,3-dichloro-2-oxindoles in moderate to excellent yields. This strategy can also be extended to 3-substituted indoles. With a broad substrate scope, it is a practical approach to 3,3-disubstituted-2-oxindoles.     

Azide Ionic Liquids for Safe,Green, and Highly-Efficient Azidation Reactions to Produce Azide Polymers

Azide compounds are widely used and especially, polymers bearing pendant azide groups are highly desired in numerous fields. However, harsh reaction conditions are always mandatory to achieve full azidation, causing severe side reactions and degradation of the polymers. Herein, we report the design and preparation of two azide ionic liquids (AILs) with azide anion and triethylene glycol (E₃)-containing cation, [P_444E3][N₃] and [MIM_E3][N₃]. Compared with the traditional sodium azide (NaN₃) approach, both AILs showed much higher reaction rates and functional-group tolerance. More importantly, they could act as both reagents and solvents for the quantitative azidation of various polymeric precursors under mild conditions. Theoretical simulations suggested that the outstanding performance of AILs originated from the existence of ion pairs during the reaction, and the E₃ moieties played a crucial role. Lastly, after the reaction, the AILs could be easily regenerated, presenting a safer, greener, and highly efficient synthesis route for azide polymers.     

High-Entropy Lithium Argyrodite Solid Electrolytes Enabling Stable All-Solid-State Batteries

Superionic solid electrolytes (SEs) are essential for bulk-type solid-state battery (SSB) applications. Multicomponent SEs are recently attracting attention for their favorable charge-transport properties, however a thorough understanding of how configurational entropy (ΔS_conf) affects ionic conductivity is lacking. Here, we successfully synthesized a series of halogen-rich lithium argyrodites with the general formula Li_5.5PS_4.5Cl_xBr_1.5-x (0≤x≤1.5). Using neutron powder diffraction and ³¹P magic-angle spinning nuclear magnetic resonance spectroscopy, the S²⁻/Cl⁻/Br⁻ occupancy on the anion sublattice was quantitatively analyzed. We show that disorder positively affects Li-ion dynamics, leading to a room-temperature ionic conductivity of 22.7 mS cm⁻¹ (9.6 mS cm⁻¹ in cold-pressed state) for Li_5.5PS_4.5Cl_0.8Br_0.7 (ΔS_conf=1.98R). To the best of our knowledge, this is the first experimental evidence that configurational entropy of the anion sublattice correlates with ion mobility. Our results indicate the possibility of improving ionic conductivity in ceramic ion conductors by tailoring the degree of compositional complexity. Moreover, the Li_5.5PS_4.5Cl_0.8Br_0.7 SE allowed for stable cycling of single-crystal LiNi_0.9Co_0.06Mn_0.04O₂ (s-NCM90) composite cathodes in SSB cells, emphasizing that dual-substituted lithium argyrodites hold great promise in enabling high-performance electrochemical energy storage.     

Synergistic Nitrogen Binding Sites in a Metal-Organic Framework for Efficient N2/O2 Separation

Porous materials with d₃ electronic configuration open metal sites have been proved to be effective adsorbents for N₂ capture and N₂/O₂ separation. However, the reported materials remain challenging to address the trade-off between adsorption capacity and selectivity. Herein, we report a robust MOF, MIL-102Cr, that features two binding sites, can synergistically afford strong interactions for N₂ capture. The synergistic adsorption site exhibits a benchmark Q_st of 45.0 kJ mol⁻¹ for N₂ among the Cr-based MOFs, a record-high volumetric N₂ uptake (31.38 cm³ cm⁻³), and highest N₂/O₂ selectivity (13.11) at 298 K and 1.0 bar. Breakthrough experiments reveal that MIL-102Cr can efficiently capture N₂ from a 79/21 N₂/O₂ mixture, providing a record 99.99 % pure O₂ productivity of 0.75 mmol g⁻¹. In situ infrared spectroscopy and computational modelling studies revealed that a synergistic adsorption effect by open Cr(III) and fluorine sites was accountable for the strong interactions between the MOF and N₂.